 Gryphon ESD (529.7 KB)
Features
Certified between static dissipative (106 OHM and 1012 OHM) and conductive (103 OHM and 106 OHM) range
Casing and dedicated cable reduce costly component failure caused by electrostatic shocks
Complete voltage discharge
Outstanding reading/decoding speed
Linear and PDF 417 bar code decoding
Warranty period: 5 years 
Applications
Electronic Component Manufacturers:
PC Board Assembly and Manufacturing, Disk Drive Manufacturing
Semi-Conductor Fabrication
Healthcare: hospitals and medical analysis laboratories
General Description
The new Gryphon™D200 ESD barcode reader has been developed by Datalogic in order to satisfy the strict requirements of EPA (ESD Protected Area). ESD is a phenomena that occurs when an object has an imbalance in its electric charge: a fast charge transfer between objects with different electrostatic potential caused by contact or by the proximity of the two objects. Wherever electronic components are handled, installed or assembled, ESD poses a threat to product quality. Moreover, an increasing number of electronic components are susceptible to be damaged or destroyed by increasingly lower voltage levels. ESD events, can also compromise the measurements taken by very sensitive instruments, such as in hospital and medical analysis laboratories. The most advanced polymer and elastomeric technologies have been used to design and develop the new ESD-safe Gryphon™ reader. Thus the body of the product is composed of a slightly conductive plastic, rather than an insulating one, preventing the accumulation of tribocharges. Moreover, specific cables have been conceived for the new Gryphon™D200 ESD guaranteeing ESD safety between any two points on it. All these characteristics are coupled with the same outstanding performances of the standard model, in terms of reading quickness: 270 scans/sec and decoding capability. It allows reading of the most popular stacked codes such as PDF417, CODABLOCK and CODE16K, as well as traditional bar codes. In addition, the Gryphon™D200 ESD exploits the "green spot", (Datalogic patent application) which provides "good reading" feedback directly on the code, where the user usually tends to be looking.
Models
GRYPHON™D200 ESD
Hand-Held reader for linear and stacked codes
Accessories
DL Sm@rtSet™
HHR CONFIGURATION SW PG5 (110 Vac)
Power supply unit 5 Vdc
PG5 (220 Vac)
Power supply unit 5 Vdc CAB - 411
RS232 cable, 9-pin female, M-ESD
CAB - 415
IBM PS/2 minidin STR.M-ESD
Specifications
ESD FEATURES
Residual Voltage: < 5V
Certification Rank: Safely between static dissipative (106 Wand 1012 W) and conductive (103 W and 106 W)
ELECTRICAL CHARACTERISTICS
Power Supply: 5 VDC ± 5%
Consumption: 250 mA operating, 330 mA max.
MECHANICAL CHARACTERISTICS
Dimensions: 179 x 81 x 98 mm (7.04 x 3.18 x 3085 in)
Case Material: Antistatic Polycarbonate alloy and co-moulded rubber
Weight: 200 g
PERFORMANCE
Enhanced Features: Puzzle Solver™, data editing and data concatenation
Warranty Period: 5 years
Max. Resolution: 0.076 mm (3 mils)
Print Contrast Ratio: pcs=15% (min.)
Sensor: CCD solid state (3648 pixels)
Max. Scan Rate: 270 scans/sec
Reading Angle: Skew: ±80°; Pitch: 65°; Tilt: ±35° (EAN13, M=0.8, PCS=0.9)
Interfaces: RS232 Wedge
Programming Method: Manual: Reading special bar codes
Automatic (with RS232): S/W commands through the serial portal
Sm@rtSet: Windows configuration program
Reading Indicators: "Green spot" on the code, adjustable tone "beeper"
Bar Codes: "Green spot" on the code, adjustable tone "beeper"
2/5 family, Code 39 (plus Code 32, Cip 39), EAN/UPC, ISBN/ISSN, EAN 128, Code 128, ISBT 128, Code 93, Code 11, CODABAR, TELEPEN, PLESSEY, Code MSI, Code Delta IBM CODABLOCK, Code 16K, PDF 417, Code 49, RSS symbologies on request
ENVIRONMENT
Humidity: 90% non condensing
Drop Resistance: IEC 68-2-32 Test ED
Environmental Protection: IP30
Operating Temperature: 0 to 55 °C (32 to 131 °F)
Ambient Light Conditions: Up to 100.000 lux
Storage Temperature: -20 to 70 °C (-4 to 158 °F)
Esd Protection: Functional after 16.5kv air discharge
|
